M3087BFLBGP#U5 Renesas Electronics America, M3087BFLBGP#U5 Datasheet - Page 465

• Manufacturer Part Number: M3087BFLBGP#U5
• Description: IC M32C/87 MCU FLASH 144LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M3087BFLBGP#U5

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IEBus, IrDA, SIO, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 121
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 34x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 144-LQFP
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M32C/87 Group (M32C/87, M32C/87A, M32C/87B)
REJ09B0180-0151 Rev.1.51 Jul 31, 2008
Page 441 of 587
23.1.20.7 RECREQ Bit
23.1.20.8 TRMREQ Bit
The RECREQ bit determines transmit/receive mode shown in Table 23.4. When the RECREQ bit is set to 1
(receive operation requested), the message slot is set to receive the data frame or remote frame. If the REMOTE
bit is set to 1 (remote frame transmitted/received) and the RSPLOCK bit is set to 0 (automatic answering to the
remote frame enabled), the data frame is transmitted automatically after the remote frame is received,
regardless of the RECREQ bit setting to 0.
Set the RECREQ bit to 0 (receive operation not requested) to transmit the data frame or remote frame.
Do not set both the TRMREQ and RECREQ bits in the same message slot to 1.
The TRMREQ bit determines transmit/receive mode shown in Table 23.4. When the TRMREQ bit is set to 1
(transmit operation requested), the data frame or remote frame is transmitted. If the REMOTE bit is set to 0
(remote frame transmitted/received), the message slot automatically switches to a receive slot for the data frame
after the remote frame is transmitted, regardless of the TRMREQ bit setting to 1.
Set the TRMREQ bit to 0 (transmit operation not requested) to receive the data frame or remote frame.
Do not set both the TRMREQ and RECREQ bits in the same message slot to 1.
NOTES:
1. When a transmit operation request occurs in multiple message slots, the data frame or remote frame in the
2. In single-shot mode, if a transmit operation is aborted due to the arbitration lost or transmit error, the value
slot which has the smallest slot number is transmitted first.
in the CiMCTLj register is cleared to 00h.
23. CAN Module