M3087BFLBGP#U5 Renesas Electronics America, M3087BFLBGP#U5 Datasheet - Page 322

• Manufacturer Part Number: M3087BFLBGP#U5
• Description: IC M32C/87 MCU FLASH 144LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M32C/80r

Specifications of M3087BFLBGP#U5

• Core Processor: M32C/80
• Core Size: 16/32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IEBus, IrDA, SIO, UART/USART
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 121
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 34x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 144-LQFP
• For Use With: R0K330879S001BE - KIT DEV RSK M32C/87R0K330879S000BE - KIT DEV RSK M32C/87
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M32C/87 Group (M32C/87, M32C/87A, M32C/87B)
REJ09B0180-0151 Rev.1.51 Jul 31, 2008
Page 298 of 587
Figure 18.5
A/D0 Control Register 3
b7
0
NOTES:
b6 b5 b4
0
1. If the AD0CON3 register is rewritten during A/D conversion, the conversion result will be incorrect.
2. The AD0CON3 register may return an incorrect value if read during A/D conversion. It must be read or written after the A/D
3. When the MSS bit is set to 1;
4. Refer to the note for the CKS0 bit in the AD0CON0 register.
5. Bits MSF1 and MSF0 are enabled when the MSS bit is set to 1. When the MSS bit is set to 0, a read from these bits returns an
0
conversion stops.
-set the DUS bit to 1 and configure DMAC.
-set bits MD1 and MD0 in the AD0CON0 register to 10b or 11b.
-set bits SCAN1 and SCAN0 in the AD0CON1 register to 11b, the MD2 bit to 0, bits OPA1 and OPA0 to 00b.
-set bits APS1 and APS0 in the AD0CON2 register to 01b.
-set bits MPS11 and MPS10 to 01b, 10b, or 11b.
undefined value.
b3
b2
AD0CON3 Register
b1
b0
Bit Symbol
(b7-b5)
MSF0
MSF1
CKS2
MSS
DUS
Symbol
AD0CON3
−
(1, 2)
DMAC operating mode
select bit
Multi-port sweep mode
select bit
Frequency select bit 2
Multi-port sweep status flags
Reserved bits
Bit Name
Address
0395h
(5)
0: DMAC operating mode not used
1: DMAC operating mode used
0: Multi-port sweep mode not used
1: Multi-port sweep mode used
(Note 4)
b4 b3
0 0: AN_0 to AN_7
0 1: AN15_0 to AN15_7
1 0: AN0_0 to AN0_7
1 1: AN2_0 to AN2_7
Set to 0.
Read as undefined value.
Function
(3)
After Reset
XXXX X000b
18. A/D Converter
RW
RW
RW
RW
RW
RO
RO