R8A77800ANBGAV Renesas Electronics America, R8A77800ANBGAV Datasheet - Page 177

• Manufacturer Part Number: R8A77800ANBGAV
• Description: IC SUPERH MPU ROMLESS 449-BGA
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7780r

Specifications of R8A77800ANBGAV

• Core Processor: SH-4A
• Core Size: 32-Bit
• Speed: 400MHz
• Connectivity: Audio Codec, MMC, Serial Sound, SCI, SIO, SPI, SSI
• Peripherals: DMA, POR, WDT
• Number Of I /o: 75
• Program Memory Type: ROMless
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.15 V ~ 1.35 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 449-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

General Interrupt Request:
• Source: The interrupt mask level bits setting in SR is smaller than the interrupt level of
• Transition address: VBR + H'00000600
• Transition operations:
5.6.4
With some instructions, such as instructions that make two accesses to memory, and the
indivisible pair comprising a delayed branch instruction and delay slot instruction, multiple
exceptions occur. Care is required in these cases, as the exception priority order differs from the
normal order.
Module_interruption()
{
}
interrupt request, and the BL bit in SR is 0 (accepted at instruction boundary).
The PC contents immediately after the instruction at which the interrupt is accepted are set in
SPC. The SR and R15 contents at the time of acceptance are set in SSR and SGR.
The code corresponding to the each interrupt source is set in INTEVT. The BL, MD, and RB
bits are set to 1 in SR, and a branch is made to VBR + H'0600.
SPC = PC;
SSR = SR;
SGR = R15;
INTEVT = H'0000 0400 ~ H'0000 3FE0;
SR.MD = 1;
SR.RB = 1;
SR.BL = 1;
if (cond) SR.IMASK = level_of accepted_interrupt ();
PC = VBR + H'0000 0600;
Priority Order with Multiple Exceptions
Rev.1.00 Dec. 13, 2005 Page 125 of 1286
Section 5 Exception Handling
REJ09B0158-0100