PM5381-BI PMC-Sierra, Inc., PM5381-BI Datasheet - Page 344

• Manufacturer Part Number: PM5381-BI
• Description: ATM UNI, Single Channel ATM PHY Interface for 2488.32Mbps
• Manufacturer: PMC-Sierra, Inc.

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2000489, Issue 4
Register 0724H: SARC Section RLAISINS Enable
OOFEN, LOFEN, LOSEN, LAISEN, LRDIEN, APSBFEN, STIUEN, STIMEN, SDBEREN,
SFBEREN
Bit
Bit 15
Bit 14
Bit 13
Bit 12
Bit 11
Bit 10
Bit 9
Bit 8
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
The above enable bits allows for the auto insertion of in-band receive AIS-P based on any or
all of the Receive Line defects listed below. A defect is a candidate for the generation if the
associated enable bit is set to logic ‘1’. If it is set to logic ‘0’, it will not be considered. If any
bits in this register are set, bit 0, “RLAISINSEN”, of register 072AH, “SARC Path
RPAISINS Enable,” must also be set.
- Out Of Frame (OOF) defect.
- Loss Of Frame (LOF) defect.
- Loss Of Signal (LOS) defect.
- Line Alarm Indication Signal (LAIS) defect.*
- Line Remote Defect Indication (LRDI) defect.
- APS Byte Failure (APSBF) defect.
- Section Trace Identifier Unstable (STIU) defect.
- Section Trace Identifier Mismatch (STIM) defect.
- Signal Degrade BER (SDBER) defect.
- Signal Failure BER (SFBER) defect.
-SD input pin deassertion or Loss of Signal (LOS) defect assertion
*Note that it is not possible to insert AIS-L in this direction due to the downstream
pointer processor. Only AIS-P may be generated.
R/W
Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Function
Unused
Unused
Unused
Unused
Reserved
SD/LOSEN
SFBEREN
SDBEREN
STIMEN
STIUEN
APSBFEN
LRDIEN
LAISEN
LOSEN
LOFEN
OOFEN
S/UNI-2488 Telecom Standard Product Datasheet
Default
0
0
0
0
0
0
0
0
0
0
0
0
Released
344