UPD78F1506GF-GAT-AX Renesas Electronics America, UPD78F1506GF-GAT-AX Datasheet - Page 183

• Manufacturer Part Number: UPD78F1506GF-GAT-AX
• Description: MCU 16BIT 78K0R/LX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Lx3r

Specifications of UPD78F1506GF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 78
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Lx3
4.2.16 Port 15
mode register 15 (PM15).
using the A/D port configuration register (ADPC) and in the input mode by using PM15. Use these pins starting from the
lower bit.
by using ADPC and in the output mode by using PM15.
generated.
R01UH0004EJ0401 Rev.4.01
Jul 2, 2010
Port 15 is an I/O port with an output latch. Port 15 can be set to the input mode or output mode in 1-bit units using port
This port can also be used for A/D converter analog input, reference voltage input, and operational amplifier input.
To use P150/ANI8/AMP2+ to P152/ANI10, P157/ANI15/AV
To use P150/ANI8/AMP2+ to P152/ANI10, P157/ANI15/AV
All P150/ANI8/AMP2+ to P152/ANI10, P157/ANI15/AV
Figures 4-35 to 4-37 show block diagrams of port 15.
Caution Make the AV
P150/ANI8/AMP2+
P151/ANI9
P152/ANI10
P157/ANI15/AV
Digital I/O
selection
Analog input
selection
ADPC register
REFM
Input mode
Output mode
Input mode
Output mode
PM2 and PM15
DD0
registers
pin the same potential as the EV
Table 4-8. Setting Functions of ANI8/AMP2+/P150 Pins
(80 pins:
78F1501A, 78F1502A)
0
1
0
1
0
1
78K0R/LF3
OAENn bit
μ
PD78F1500A,
−
−
−
−
Selects ANI.
Does not select ANI.
Selects ANI.
Does not select ANI.
REFM
REFM
ADS register
(100 pins:
REFM
are set in the digital input mode when the reset signal is
78F1504A, 78F1505A)
DD
as digital input pins, set them in the digital I/O mode by
−
−
−
−
−
as digital output pins, set them in the digital I/O mode
or V
78K0R/LG3
μ
DD
PD78F1503A,
√
pin when port 15 is used as a digital port.
Digital input
Setting prohibited
Digital output
Setting prohibited
Analog input (to be A/D converted)
Analog input (not to be A/D
converted)
Setting prohibited
Operational amplifier input
Setting prohibited
CHAPTER 4 PORT FUNCTIONS
ANI8/AMP2+/P150 Pins
√
√
√
(128 pins:
78F1507A, 78F1508A)
78K0R/LH3
μ
PD78F1506A,
183