UPD78F1506GF-GAT-AX Renesas Electronics America, UPD78F1506GF-GAT-AX Datasheet - Page 357

• Manufacturer Part Number: UPD78F1506GF-GAT-AX
• Description: MCU 16BIT 78K0R/LX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Lx3r

Specifications of UPD78F1506GF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 78
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Lx3
R01UH0004EJ0401 Rev.4.01
Jul 2, 2010
Address: FFF9EH
(3) Real-time counter control register 1 (RTCC1)
RTCC1
Symbol
The RTCC1 register is an 8-bit register that is used to control the alarm interrupt function and the wait time of the
counter.
RTCC1 can be set by a 1-bit or 8-bit memory manipulation instruction.
Reset signal generation clears this register to 00H.
When setting a value to the WALE bit while the counter operates (RTCE = 1) and WALIE = 1, rewrite the WALE bit
after disabling interrupt servicing INTRTC by using the interrupt mask flag register. Furthermore, clear the WAFG
and RTCIF flags after rewriting the WALE bit. When setting each alarm register (WALIE flag of RTCC1, the
ALARMWM register, the ALARMWH register, and the ALARMWW register), set match operation to be invalid (“0”)
for the WALE bit.
This is a status flag that indicates detection of matching with the alarm. It is valid only when WALE = 1 and is set to
“1” one clock (32.768 kHz) after matching of the alarm is detected. This flag is cleared when “0” is written to it.
Writing “1” to it is invalid.
WALIE
WAFG
WALE
WALE
<7>
0
1
0
1
0
1
After reset: 00H
Figure 7-4. Format of Real-Time Counter Control Register 1 (RTCC1) (1/2)
Match operation is invalid.
Match operation is valid.
Does not generate interrupt on matching of alarm.
Generates interrupt on matching of alarm.
Alarm mismatch
Detection of matching of alarm
WALIE
<6>
R/W
5
0
Control of alarm interrupt (INTRTC) function operation
WAFG
<4>
Alarm detection status flag
Alarm operation control
RIFG
<3>
CHAPTER 7 REAL-TIME COUNTER
2
0
RWST
<1>
RWAIT
<0>
357