UPD78F1506GF-GAT-AX Renesas Electronics America, UPD78F1506GF-GAT-AX Datasheet - Page 274

• Manufacturer Part Number: UPD78F1506GF-GAT-AX
• Description: MCU 16BIT 78K0R/LX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Lx3r

Specifications of UPD78F1506GF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 78
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Lx3
R01UH0004EJ0401 Rev.4.01
Jul 2, 2010
Note If the start trigger (TSmn = 1) is issued during operation, the counter is cleared, an interrupt is
Remark mn: Unit number + Channel number
generated, and recounting is started.
• Interval timer mode
• Capture mode
• Event counter mode
• One-count mode
• Capture & one-count mode
(0, 1, 0)
(0, 1, 1)
(1, 0, 0)
(1, 1, 0)
(0, 0, 0)
(Value set by the MDmn3 to MDmn1 bits
mn = 00 to 07, 10 to 13
(see table above))
Operation mode
Figure 6-7. Format of Timer Mode Register mn (TMRmn) (4/4)
Other than above
mn0
MD
0
1
0
0
1
0
Timer interrupt is not generated when counting is started
(timer output does not change, either).
Timer interrupt is generated when counting is started
(timer output also changes).
Timer interrupt is not generated when counting is started
(timer output does not change, either).
Start trigger is invalid during counting operation.
At that time, interrupt is not generated, either.
Start trigger is valid during counting operation
At that time, interrupt is also generated.
Timer interrupt is not generated when counting is started
(timer output does not change, either).
Start trigger is invalid during counting operation.
At that time interrupt is not generated, either.
Setting prohibited
Setting of starting counting and interrupt
CHAPTER 6 TIMER ARRAY UNIT
Note
.
274