UPD78F1506GF-GAT-AX Renesas Electronics America, UPD78F1506GF-GAT-AX Datasheet - Page 53

• Manufacturer Part Number: UPD78F1506GF-GAT-AX
• Description: MCU 16BIT 78K0R/LX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Lx3r

Specifications of UPD78F1506GF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 78
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Lx3
R01UH0004EJ0401 Rev.4.01
Jul 2, 2010
Cautions 1.
(g) TxD1, TxD2
(h) TI05
(i)
(j)
These are serial data output pin of serial interface UART1 and UART2.
This is a timer input pin of 16-bit timer 05.
TO02, TO04, TO05
These are the timer output pins of 16-bit timers 02, 04, and 05.
INTP4, INTP6, INTP7, INTP10
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
2.
3.
4.
5.
To use P10/SCK20/SCL20 and P11/SI20/RxD2/SDA20/INTP6 as a general-purpose port, note the
serial array unit 1 setting. For details, refer to Table 14-9 Relationship Between Register Settings
and Pins (Channel 0 of unit 1: CSI20, UART2 Reception, IIC20).
To use P12/TO02/SO20/TxD2 as a general-purpose port, set bit 2 (TO02) of timer output register 0
(TO0) and bit 2 (TOE02) of timer output enable register 0 (TOE0) to “0”, which is the same as
their default status setting. And as a general-purpose port, note the serial array unit 1 setting.
For details of serial array unit 1 setting, refer to Table 14-9 Relationship Between Register
Settings and Pins (Channel 0 of unit 1: CSI20, UART2 Reception, IIC20).
To use P13/TO04/SO10/TxD1 as a general-purpose port, set bit 4 (TO04) of timer output register 0
(TO0) and bit 4 (TOE04) of timer output enable register 0 (TOE0) to “0”, which is the same as
their default status setting. And as a general-purpose port, note the serial array unit 0 setting.
For details of serial array unit 0 setting, refer to Table 14-7 Relationship Between Register
Settings and Pins (Channel 2 of unit 0: CSI10, UART1 Transmission, IIC10)
To use P14/SI10/RxD1/SDA10/INTP4 and P15/SCK10/SCL10/INTP7 as a general-purpose port,
note the serial array unit 0 setting. For details, refer to Table 14-7 Relationship Between Register
Settings and Pins (Channel 2 of unit 0: CSI10, UART1 Transmission, IIC10)
To use P16/TO05/TI05/INTP10 as a general-purpose port, set bit 5 (TO05) of timer output register
0 (TO0) and bit 5 (TOE05) of timer output enable register 0 (TOE0) to “0”, which is the same as
their default status setting.
CHAPTER 2 PIN FUNCTIONS
53