UPD78F1506GF-GAT-AX Renesas Electronics America, UPD78F1506GF-GAT-AX Datasheet - Page 55

• Manufacturer Part Number: UPD78F1506GF-GAT-AX
• Description: MCU 16BIT 78K0R/LX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Lx3r

Specifications of UPD78F1506GF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 78
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

78K0R/Lx3
2.2.4 P30 to P34
clock output, clock output/buzzer output, and external interrupt request input.
(1) Port mode
(2) Control mode
R01UH0004EJ0401 Rev.4.01
Jul 2, 2010
P30 to P34 function as an I/O port. This port can also be used for timer I/O, real-time counter clock output, correction
The following operation modes can be specified in 1-bit units.
P30/TI03/TO00/RTC1HZ/
INTP1
P31/TI00/TO03/RTCDIV/
RTCCL/PCLBUZ1/INTP2
P32/TI01/TO01/PCLBUZ0/
INTP5
P33/TI07/TO07/INTP3
P34/TI06/TO06/INTP8
P30 to P34 function as an I/O port. P30 to P34 can be set to input or output port in 1-bit units using port mode
register 3 (PM3). Use of an on-chip pull-up resistor can be specified by pull-up resistor option register 3 (PU3).
P30 to P34 function as timer I/O, real-time counter clock output, correction clock output, clock output/buzzer output,
and external interrupt request input.
(a) TI00, TI01, TI03 TI06, TI07
(b) TO00, TO01, TO03, TO06, TO07
(c) RTCCL
(d) RTCDIV
(e) RTC1HZ
(f) PCLBUZ0, PCLBUZ1
(g) INTP1, INTP2, INTP3, INTP5, INTP8
These are the timer input pins of 16-bit timers 00, 01, 03, 06, and 07.
These are the timer output pins of 16-bit timers 00, 01, 03, 06, and 07.
This is a real-time counter clock (32 kHz, original oscillation) output pin.
This is a real-time counter clock (32 kHz, divided) output pin.
This is a real-time counter correction clock (1 Hz) output pin.
These are clock output/buzzer output pins.
These are the external interrupt request input pins for which the valid edge (rising edge, falling edge, or both
rising and falling edges) can be specified.
(80 pins:
78F1501A, 78F1502A)
78K0R/LF3
μ
PD78F1500A,
−
(100 pins:
78F1504A, 78F1505A)
78K0R/LG3
μ
PD78F1503A,
√
√
√
√
CHAPTER 2 PIN FUNCTIONS
√
(128 pins:
78F1507A, 78F1508A)
78K0R/LH3
μ
PD78F1506A,
55