UPD78F1506GF-GAT-AX Renesas Electronics America, UPD78F1506GF-GAT-AX Datasheet - Page 950

• Manufacturer Part Number: UPD78F1506GF-GAT-AX
• Description: MCU 16BIT 78K0R/LX3 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: 78K0R/Lx3r

Specifications of UPD78F1506GF-GAT-AX

• Core Processor: 78K/0R
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: 3-Wire SIO, I²C, LIN, UART/USART
• Peripherals: DMA, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 78
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
<R>
78K0R/Lx3
A.4.2 When using on-chip debug emulator with programming function QB-MINI2
A.5 Debugging Tools (Software)
R01UH0004EJ0401 Rev.4.01
Jul 2, 2010
QB-MINI2
On-chip debug emulator with
programming function
ID78K0R-QB
Integrated debugger
SM+ for 78K0R
SM+ for 78K0R/Lx3
System simulator
Part Number
Remark
Remark Download the software for operating the QB-MINI2 from the download site for MINICUBE2
Notes 1.
QB-78K0RLX3-ZZZ
QB-78K0RLX3-T80GC
QB-78K0RLX3-T80GK
QB-78K0RLX3-T100GC
QB-78K0RLX3-T128GF
2.
Packed Contents
(http://www2.renesas.com/micro/en/development/asia/minicube2/minicube2.html).
2. The packed contents differ depending on the part number, as follows.
Download the ID78K0R-QB from the download site for development tools
(http://www2.renesas.com/micro/en/ods/).
Under development
Note 2
Note 1
QB-78K0RLX3
In-Circuit Emulator Emulation Probe
This on-chip debug emulator serves to debug hardware and software when developing
application systems using the 78K0R/Lx3 microcontrollers. It is available also as flash
memory programmer dedicated to microcontrollers with on-chip flash memory. When
using this as on-chip debug emulator, it should be used in combination with a connection
cable (16-pin cable), and USB interface cable that is used to connect the host machine.
This debugger supports the in-circuit emulators for the 78K0R microcontrollers. The
ID78K0R-QB is Windows-based software.
It has improved C-compatible debugging functions and can display the results of tracing
with the source program using an integrating window function that associates the source
program, disassemble display, and memory display with the trace result. It should be
used in combination with the device file (DF781508).
System simulator is Windows-based software.
It is used to perform debugging at the C source level or assembler level while simulating
the operation of the target system on a host machine.
Use of system simulator allows the execution of application logical testing and
performance testing on an independent basis from hardware development, thereby
providing higher development efficiency and software quality.
System simulator should be used in combination with the device file (DF781508).
The following two types of system simulators supporting the 78K0R/Lx3 microcontrollers
are available.
• SM+ for 78K0R (instruction simulation version)
• SM+ for 78K0R/Lx3 (instruction + peripheral simulation version)
This can only simulate a CPU. It is included in the software package.
This can simulate a CPU and peripheral hardware (ports, timers, serial interfaces,
etc.).
None
QB-144-EP-02S
QB-80GK-EA-09T
QB-80GK-EA-08T
QB-100GC-EA-08T
QB-128GF-EA-01T
Exchange Adapter
APPENDIX A DEVELOPMENT TOOLS
QB-80GC-YQ-01T
QB-80GK-YQ-01T
QB-100GC-YQ-01T
QB-128GF-YQ-01T QB-128GF-NQ-01T
YQ Connector
Note 1
QB-80GC-NQ-01T
QB-80GK-NQ-01T
QB-100GC-NQ-01T
Target Connector
950