FW82801DBM S L6DN Intel, FW82801DBM S L6DN Datasheet - Page 204

• Manufacturer Part Number: FW82801DBM S L6DN
• Manufacturer: Intel

Specifications of FW82801DBM S L6DN

• Lead Free Status / RoHS Status: Not Compliant

Functional Description
204
When the C_ERR field decrements to zero, the following occurs:
If the CRC/Time out interrupt is enabled in the Interrupt Enable register, a hardware interrupt will
be signaled to the system.
Interrupt on Completion
Transfer Descriptors contain a bit that can be set to cause an interrupt on their completion. The
completion of the transaction associated with that block causes the USB Interrupt bit in the HC
Status Register to be set at the end of the frame in which the transfer completed. When a TD is
encountered with the IOC bit set to 1, the IOC bit in the HC Status register is set to 1 at the end of
the frame if the active bit in the TD is set to 0 (even if it was set to zero when initially read).
If the IOC Enable bit of Interrupt Enable register (bit 2 of I/O offset 04h) is set, a hardware
interrupt is signaled to the system. The USB Interrupt bit in the HC status register is set either when
the TD completes successfully or because of errors. If the completion is because of errors, the USB
Error bit in the HC status register is also set.
Short Packet Detect
A transfer set is a collection of data which requires more than 1 USB transaction to completely
move the data across the USB. An example might be a large print file which requires numerous
TDs in multiple frames to completely transfer the data. Reception of a data packet that is less than
the endpoint’s Max Packet size during Control, Bulk or Interrupt transfers signals the completion
of the transfer set, even if there are active TDs remaining for this transfer set. Setting the SPD bit in
a TD indicates to the HC to set the USB Interrupt bit in the HC status register at the end of the
frame in which this event occurs. This feature streamlines the processing of input on these transfer
types. If the Short Packet Interrupt Enable bit in the Interrupt Enable register is set, a hardware
interrupt is signaled to the system at the end of the frame where the event occurred.
Serial Bus Babble
When a device transmits on the USB for a time greater than its assigned Max Length, it is said to
be babbling. Since isochrony can be destroyed by a babbling device, this error results in the Active
bit in the TD being cleared to 0 and the Stalled and Babble bits being set to one. The C_ERR field
is not decremented for a babble. The USB Error Interrupt bit in the HC Status register is set to 1 at
the end of the frame. A hardware interrupt is signaled to the system.
If an EOF babble was caused by the ICH4 (due to incorrect schedule for instance), the ICH4 will
force a bit stuff error followed by an EOP and the start of the next frame.
Stalled
This event indicates that a device/endpoint returned a STALL handshake during a transaction or
that the transaction ended in an error condition. The TDs Stalled bit is set and the Active bit is
cleared. Reception of a STALL does not decrement the error counter. A hardware interrupt is
signaled to the system.
•
•
•
•
The Active bit in the TD is cleared
The Stalled bit in the TD is set
The CRC/Time-out bit in the TD is set.
At the end of the frame, the USB Error Interrupt bit is set in the HC status register.
Intel
®
82801DBM ICH4-M Datasheet