FW82801DBM S L6DN Intel, FW82801DBM S L6DN Datasheet - Page 353

no-image

FW82801DBM S L6DN

Manufacturer Part Number
FW82801DBM S L6DN
Description
Manufacturer
Intel
Datasheet

Specifications of FW82801DBM S L6DN

Lead Free Status / RoHS Status
Not Compliant
9.6
9.6.1
Intel
®
Table 9-6. RTC I/O Registers
82801DBM ICH4-M Datasheet
Real Time Clock Registers
I/O Register Address Map
The RTC internal registers and RAM are organized as two banks of 128 bytes each, called the
standard and extended banks. The first 14 bytes of the standard bank contain the RTC time and date
information along with four registers, A
extended bank contains a full 128 bytes of battery backed SRAM, and will be accessible even when
the RTC module is disabled (via the RTC configuration register). Registers A–D do not physically
exist in the RAM.
All data movement between the host processor and the real-time clock is done through registers
mapped to the standard I/O space. The register map appears in
NOTES:
1. I/O locations 70h and 71h are the standard ISA location for the real-time clock. The map for this bank is
2. Software must preserve the value of bit 7 at I/O addresses 70h and 74h. When writing to these addresses,
3. Accesses to 70h, 72h, 74h, and 76h do affect the NMI mask (bit 7 of 70h).
I/O Locations
70h and 74h
71h and 75h
72h and 76h
73h and 77h
shown in
also accessed using an indexed scheme. I/O address 72h is used as the address pointer and I/O address
73h is used as the data register. Index addresses above 127h are not valid. If the extended RAM is not
needed, it may be disabled.
software must first read the value, and then write the same value for bit 7 during the sequential address write.
Table
9-7. Locations 72h and 73h are for accessing the extended RAM. The extended RAM bank is
Also alias to 72h and 76h
Also alias to 73h and 77h
If U128E bit = 0
D, that are used for configuration of the RTC. The
Real-Time Clock (Standard RAM) Index Register
Real-Time Clock (Standard RAM) Target Register
Extended RAM Index Register (if enabled)
Extended RAM Target Register (if enabled)
LPC Interface Bridge Registers (D31:F0)
Table
Function
9-6.
353

Related parts for FW82801DBM S L6DN