FW82801DBM S L6DN Intel, FW82801DBM S L6DN Datasheet - Page 384

• Manufacturer Part Number: FW82801DBM S L6DN
• Manufacturer: Intel

Specifications of FW82801DBM S L6DN

• Lead Free Status / RoHS Status: Not Compliant

LPC Interface Bridge Registers (D31:F0)
9.8.3.14
9.8.3.15
9.8.3.16
384
ALT_GP_SMI_EN—Alternate GPI SMI Enable Register
I/O Address:
Default Value:
Lockable:
Power Well:
ALT_GP_SMI_STS—Alternate GPI SMI Status Register
I/O Address:
Default Value:
Lockable:
Power Well:
MON_SMI—Device Monitor SMI Status and Enable Register
I/O Address:
Default Value:
Lockable:
Power Well:
15:12
15:0
15:0
11:8
Bit
Bit
Bit
7:0
Alternate GPI SMI Enable — R/W. These bits are used to enable the corresponding GPIO to cause
an SMI#. For these bits to have any effect, the following must be true.
Alternate GPI SMI Status — R/WC. These bits report the status of the corresponding GPIs.
1 = active, 0 = inactive. These bits are sticky. If the following conditions are true, an SMI# will be
generated and the GPE0_STS bit set:
All bits are in the resume well. Default for these bits is dependent on the state of the GPI pins.
DEV[7:4]_TRAP_STS — R/WC. Bit 12 corresponds to Monitor 4, bit 13 corresponds to Monitor 5
etc.
0 = SMI# was not caused by the associated device monitor.
1 = SMI# was caused by an access to the corresponding device monitor’s I/O range.
DEV[7:4]_TRAP_EN — R/W. Bit 8 corresponds to Monitor 4, bit 9 corresponds to Monitor 5 etc.
0 = Disable.
1 = Enables SMI# due to an access to the corresponding device monitor’s I/O range.
Reserved
• The corresponding bit in the ALT_GP_SMI_EN register is set.
• The corresponding GPI must be routed in the GPI_ROUT register to cause an SMI.
• The corresponding GPIO must be implemented.
• The corresponding bit in the ALT_GPI_SMI_EN register is set
• The corresponding GPI must be routed in the GPI_ROUT register to cause an SMI.
• The corresponding GPIO must be implemented.
No
No
No
Core
PMBASE +38h
0000h
Resume
PMBASE +3Ah
0000h
Resume
PMBASE +40h
0000h
Description
Description
Description
Attribute:
Size:
Usage:
Attribute:
Size:
Usage:
Attribute:
Size:
Usage:
Intel
®
82801DBM ICH4-M Datasheet
R/W
16 bit
ACPI or Legacy
R/WC
16 bit
ACPI or Legacy
R/W, R/WC
16 bit
Legacy Only