FW82801DBM S L6DN Intel, FW82801DBM S L6DN Datasheet - Page 357

• Manufacturer Part Number: FW82801DBM S L6DN
• Manufacturer: Intel

Specifications of FW82801DBM S L6DN

• Lead Free Status / RoHS Status: Not Compliant

9.6.2.3
9.6.2.4
Intel
®
82801DBM ICH4-M Datasheet
RTC_REGC—Register C (Flag Register)
RTC Index:
Default Value:
Lockable:
Writes to Register C have no effect.
RTC_REGD—Register D (Flag Register)
RTC Index:
Default Value:
Lockable:
3:0
Bit
5:0
Bit
7
6
5
4
7
6
Valid RAM and Time Bit (VRT) — R/W.
0 = This bit should always be written as a 0 for write cycle; however, it will return a 1 for read cycles.
1 = This bit is hardwired to 1 in the RTC power well.
Reserved. This bit always returns a 0 and should be set to 0 for write cycles.
Date Alarm — R/W. These bits store the date of month alarm value. If set to 000000b, then a don’t
care state is assumed. The host must configure the date alarm for these bits to do anything, yet they
can be written at any time. If the date alarm is not enabled, these bits will return zeros to mimic the
functionality of the Motorola 146818B. These bits are not affected by RESET.
Interrupt Request Flag (IRQF) — RO. IRQF = (PF * PIE) + (AF * AIE) + (UF *UFE). This also causes
the CH_IRQ_B signal to be asserted. This bit is cleared upon RSMRST# or a read of Register C.
Periodic Interrupt Flag (PF) — RO. This bit is cleared upon RSMRST# or a read of Register C.
0 = If no taps are specified via the RS bits in Register A, this flag will not be set.
1 = Periodic interrupt Flag will be 1 whenever the tap specified by the RS bits of register A is 1.
Alarm Flag (AF) — RO.
0 = This bit is cleared upon RTCRST# or a read of Register C.
1 = Alarm Flag will be set after all Alarm values match the current time.
Update-ended Flag (UF) — RO.
0 = The bit is cleared upon RSMRST# or a read of Register C.
1 = Set immediately following an update cycle for each second.
Reserved. Will always report 0.
0Ch
00U00000 (U: Undefined)
No
0Dh
10UUUUUU (U: Undefined)
No
Description
Description
Attribute:
Size:
Power Well:
Attribute:
Size:
Power Well:
LPC Interface Bridge Registers (D31:F0)
RO
8 bit
RTC
R/W
8 bit
RTC
357