NQ5000P S L9TN Intel, NQ5000P S L9TN Datasheet - Page 25

• Manufacturer Part Number: NQ5000P S L9TN
• Manufacturer: Intel

Specifications of NQ5000P S L9TN

• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Not Compliant

Signal Description
2
Intel® 5000P/5000V/5000Z Chipset Memory Controller Hub (MCH) Datasheet
Signal Description
This section provides a detailed description of MCH signals. The signals are arranged in
functional groups according to their associated interface. The signals presented in this
section may not be present in all Intel 5000 Series Chipsets. To determine if a signal is
in a particular version, consult
conventions are used:
The terms assertion and deassertion are to avoid confusion when working with a mix of
active-high and active-low signals. The terms assert, or assertion, indicates that the
signal is active, independent of whether the active level is represented by a high or low
voltage. The terms deassert, or deassertion, indicates that the signal is inactive.
Signal names may or may not have a “#” appended to them. The “#” symbol at the
end of a signal name indicates that the active, or asserted state occurs when the signal
is at a low voltage level. When “#” is not present after the signal name, the signal is
asserted when at the high voltage level.
Differential signal pairs adopt a “{P/N}” suffix to indicate the “positive” (P) or
“negative” (N) signal in the pair. If a “#” is appended, it is appended to the positive and
negative signals in a pair.
Typical frequencies of operation for the fastest operating modes are indicated. No
frequency is specified for asynchronous or analog signals.
Some signals or groups of signals have multiple versions. These signal groups may
represent distinct but similar ports or interfaces, or may represent identical copies of
the signal used to reduce loading effects.
Curly-bracketed non-trailing numerical indices, for example, “{X/Y}”, represent
replications of major buses. Square-bracketed numerical indices, for example, “[n:m]”
represent functionally similar but logically distinct bus signals; each signal provides an
independent control, and may or may not be asserted at the same time as the other
signals in the grouping. In contrast, trailing curly-bracketed numerical indices, for
example, “{x/y}” typically represent identical duplicates of a signal; such duplicates
are provided for electrical reasons.
The following notations are used to describe the signal type:
I
O
I/O
s/t/s Sustained Tri-state. This pin is driven to its inactive state prior to tri-stating.
The signal description also includes the type of buffer used for the particular signal:
AGTL+ Open Drain AGTL+ interface signal. Refer to the AGTL+ I/O Specification for
LVTTL Low Voltage TTL 3.3 V compatible signals
SSTL_2 Stub Series Terminated Logic 2.6 V compatible signals
Input pin
Output pin
Bi-directional Input/Output pin
complete details. The MCH integrates AGTL+ termination resistors, and
supports VTT from 1.15 V to 1.55 V.
Section
10. Throughout this section the following
25