R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 160

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 123 of 802
9.
9.1
The description offered in this chapter is based on the R8C/L3AA Group and the R8C/L3AB Group.
For other groups, refer to 1.1.2 Differences between Groups.
Table 9.1
Standard operating
mode
Wait mode
Stop mode
Power-off mode
There are four power control modes. All modes other than wait mode, stop mode, and power-off mode are referred
to as standard operating mode.
Table 9.1 lists each mode. Figure 9.1 shows the State Transitions in Power Control Mode.
Note
Power Control
Introduction
Power Control
High-speed clock
Low-speed clock
Low-speed on-chip oscillator
Mode
Oct 30, 2009
The CPU and peripheral functions operate.
The CPU stops and peripheral functions operate.
The CPU and peripheral functions stop (oscillation stops).
Functions other than the low-speed clock and timer RE stop
or all functions stop.
Operation
9. Power Control