R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 661

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 624 of 802
Figure 28.8
Hardware LIN
UART0
Timer RA Set the Synch Break width again
UART0
(UART) mode ID field reception
Communication via UART0
Clock asynchronous serial interface
Set the UART0 communication rate
U0BRG register
TRAPRE register
TRA register
Header Field Reception Flowchart Example (3)
Read the Synch Field measurement-
complete flag
SFDCT flag in LINST register
SFDCT = 1?
YES
YES
Oct 30, 2009
B
NO
A Synch Field for the hardware LIN
is measured.
A timer RA interrupt can be used.
(The SBDCT flag is set when
the timer RA counter underflows.)
When the SBE bit in the LINCR
register is set to 1 (unmasked after
Synch Filed measurement
completed), timer RA can be used in
timer mode after the SFDCT flag in
the LINST register is set to 1 and the
RXDSF flag is set to 0.
Set a communication rate based on
the Synch Field measurement
result.
Communication is performed via
UART0.
(The SBDCT flag is set when
the timer RA counter underflows.)
28. Hardware LIN