R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 862

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

RENESAS TECHNICAL UPDATE TN-R8C-A007A/E
8.
Notes on bit operation
(This note applies to the R8C/3x Series and R8C/Lx Series.)
Set the following bits with consecutive instructions. Do not allow interrupts or DTC transfer to occur between executing
instructions.
(1) PRC2 bit:
(2) Bits CSPRO, FMR01, FMR02, FMR13, FMR20, FMR22, and FMR27:
(3) Bits FMR14, FMR15, FMR16, and FMR17:
The PRC2 bit becomes 0 after setting it to 1 (write enabled) and writing to an SFR area. Write to the register
protected by the PRC2 bit with the next instruction after that used to set the PRC2 bit to 1. Do not allow interrupts
or DTC transfer between the instruction to set to the PRC2 bit to 1 and the next instruction.
When setting these bits to 1, write 0 immediately followed by 1. Do not allow interrupts and DTC transfer to occur
between writing 0 and writing 1.
When setting these bits to 0, write 1 immediately followed by 0. Do not allow interrupts and DTC transfer to occur
between writing 1 and writing 0.
Date: Sep.25, 2009
Page 3 of 3