R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 433

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 396 of 802
Table 20.14
BFD0, BFC1, BFD1: Bits in TRDMR register
TRDGRA0
TRDGRB0
TRDGRA1
TRDGRB1
TRDGRC0
TRDGRD0
TRDGRC1
TRDGRD1
Register
Since values cannot be written to the TRDGRB0, TRDGRA1, or TRDGRB1 register directly after count
operation starts (prohibited item), use the TRDGRD0, TRDGRC1, or TRDGRD1 register as a buffer register.
However, to write data to the TRDGRD0, TRDGRC1, or TRDGRD1 register, set bits BFD0, BFC1, and BFD1
to 0 (general register). After this, bits BFD0, BFC1, and BFD1 may be set to 1 (buffer register).
BFD0 = 1 Buffer register. Set the changing point of next PWM1 output.
BFC1 = 1 Buffer register. Set the changing point of next PWM2 output.
BFD1 = 1 Buffer register. Set the changing point of next PWM3 output.
Setting
TRDGRji Register Functions in Complementary PWM Mode
General register. Set the PWM period at initialization.
Setting range: TRD0 register setting value or above,
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
General register. Set the changing point of PWM1 output at
initialization.
Setting range: TRD0 register setting value or above,
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
General register. Set the changing point of PWM2 output at
initialization.
Setting range: TRD0 register setting value or above,
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
General register. Set the changing point of PWM3 output at
initialization.
Setting range: TRD0 register setting value or above,
Do not write to this register when the TSTART0 and TSTART1
bits in the TRDSTR register are set to 1 (count starts).
This register is n
(Refer to 20.2.2 Buffer Operation. )
Setting range: TRD0 register setting value or above,
Set this register to the same value as the TRDGRB0 register
for initialization.
(Refer to 20.2.2 Buffer Operation. )
Setting range: TRD0 register setting value or above,
Set this register to the same value as the TRDGRA1 register
for initialization.
(Refer to 20.2.2 Buffer Operation. )
Setting range: TRD0 register setting value or above,
Set this register to the same value as the TRDGRB1 register
for initialization.
Oct 30, 2009
FFFFh - TRD0 register setting value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
TRDGRA0 register - TRD0 register setting
value or below
ot used in complementary PWM mode.
Register Function
(Output inverted every half
period of TRDIOC0 pin)
TRDIOB0
TRDIOD0
TRDIOA1
TRDIOC1
TRDIOB1
TRDIOD1
TRDIOB0
TRDIOD0
TRDIOA1
TRDIOC1
TRDIOB1
TRDIOD1
PWM Output Pin
20. Timer RD