R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 664

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 627 of 802
28.5
Table 28.2
Synch Break detection
Completion of Synch
Break generation
Completion of Synch
Field measurement
Bus collision detection
There are four interrupt requests generated by the hardware LIN: Synch Break detection, completion of Synch
Break generation, completion of Synch Field measurement, and bus collision detection. These interrupts are shared
with timer RA.
Table 28.2 lists the Hardware LIN Interrupt Requests.
Interrupt Request
Interrupt Requests
Hardware LIN Interrupt Requests
Oct 30, 2009
Status Flag
BCDCT
SBDCT
SFDCT
Generated when timer RA underflows after the low-level
duration for the RXD0 input is measured. Or when a low-
level signal is input for a duration longer than the Synch
Break period during communication.
Generated when the low-level output to TXD0 for the
duration set by timer RA is completed.
Generated when measurement for 6 bits of the Lynch Field
by timer RA is completed.
Generated when the RXD0 input and TXD0 output values
are different at the data latch timing while UART0 is enabled
for transmission.
Interrupt Source
28. Hardware LIN