R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 247

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 210 of 802
Figure 15.7
Write 0 to the interrupt source
flag in the status register
Write back control data
DTC activation source
Read control data
Read DTC vector
Transfer data
generation
NMIF = 1?
CHNE=1?
Branch 1
End
No
No
DTC Internal Operation Flowchart When DTC Activation Source is Flash ready status
Yes
Yes
Oct 30, 2009
Write back control data
Read control data
Transfer data
CHNE=1?
No
Yes
Branch 1
0 is written to the bit among bits DTCENi0 to DTCENi7 when transfer is either of the following:
- Transfer causing the DTCCTj (j = 0 to 23) register value to change from 1 to 0 in normal mode
- Transfer causing the DTCCTj register value to change from 1 to 0 while the RPTINT bit is 1 in
DTCENi0 to DTCENi7: Bits in DTCENi (i = 0 to 6) register
RPTINT, CHNE: Bits in DTCCRj register
NMIF: Bit in DTCTL register
repeat mode
Write 0 to the interrupt source
flag in the status register
Write 0 to the bit among
Write back control data
DTCENi0 to DTCENi7
Transfer data
CHNE=1?
No
Yes
Write back control data
Read control data
Transfer data
CHNE=1?
No
Yes
15. DTC