R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 751

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 714 of 802
Figure 33.10
Notes:
1. The interrupt vector table and interrupt routine for interrupts to be used must be allocated to an area other the erase target area.
2. td(SR-SUS) is required until suspend is acknowledged after the FMR21 bit is set to 1.
The interrupt to enter suspend must be enabled beforehand.
Write the command code 20h
Write D0h to any block address
Block Erase Flowchart (Flash Ready Status Interrupt Disabled and Suspend Enabled)
I = 1 (interrupt enabled)
Block erase completed
Full status check
FMR20 = 1
FST7 = 1?
Start
Oct 30, 2009
Yes
No
Access the flash memory
Maskable interrupt
FMR21 = 1
FMR21 = 0
FST6 = 1?
REIT
Yes
I: Flag in CPU register
FST6, FST7: Bits in FST register
FMR20, FMR21: Bits in FMR2 register
(2)
(1)
No
33. Flash Memory