R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 753

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 716 of 802
Figure 33.12
33.4.11.5 Lock Bit Program Command
This command is used to set the lock bit of any block in the program ROM area to 0 (locked).
When 77h is written in the first bus cycle and D0h is written in the second bus cycle to the starting block
address, 0 is written to the lock bit of the specified block. Make sure the address value in the first bus cycle is
the same address as the starting block address specified in the second bus cycle.
Figure 33.12 shows the Lock Bit Program Flowchart. The lock bit status (lock bit data) can be read using the
read lock bit status command.
The FST7 bit in the FST register can be used to confirm whether writing to the lock bit has completed.
Refer to 33.4.10 Data Protect Function for the lock bit function and how to set the lock bit to 1 (not locked).
Lock Bit Program Flowchart
Write the command code 77h
Write D0h to the starting
block address
Oct 30, 2009
Full status check
Completed
FST7 = 1?
Start
Yes
No
FST7: Bit in FST register
33. Flash Memory