R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 816

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 779 of 802
35.20.1.3 How to Access
35.20.1.4 Rewriting User ROM Area
35.20.1.5 Programming
35.20.1.6 Entering Stop Mode or Wait Mode
35.20.1.7 Programming and Erasure Voltage for Flash Memory
35.20.1.8 Block Blank Check
To set one of the following bits to 1, first write 0 and then 1 immediately. Do not generate an interrupt between
writing 0 and writing 1.
•
•
•
To set one of the following bits to 0, first write 1 and then 0 immediately. Do not generate an interrupt between
writing 1 and writing 0.
•
In EW0 Mode, if the supply voltage drops while rewriting any block in which a rewrite control program is
stored, it may not be possible to rewrite the flash memory because the rewrite control program cannot be
rewritten correctly. In this case, use standard serial I/O mode.
Do not write additions to the already programmed address.
Do not enter stop mode or wait mode during erase-suspend.
When the FST7 in the FST register is set to 0 (busy (during programming or erasure execution), do not enter to
stop mode or wait mode.
To perform programming and erasure, use VCC = 2.7 V to 5.5 V as the supply voltage. Do not perform
programming and erasure at less than 2.7 V.
Do not execute the block blank check command during erase-suspend.
The FMR01 or FMR02 bit in the FMR0 register
The FMR13 bit in the FMR1 register
The FMR20, FMR22, or FMR 27 bit in the FMR2 register
The FMR14, FMR15, FMR16, or FMR17 bit in the FMR1 register
Oct 30, 2009
35. Usage Notes