R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 607

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 570 of 802
26.5
In 4-wire bus communication mode, a 4-wire bus consisting of a clock line, a data input line, a data output line, and
a chip select line is used for communication. This mode includes bidirectional mode in which the data input line
and data output line function as a single pin.
The data input line and output line change according to the settings of the MSS bit in the SSCRH register and the
BIDE bit in the SSMR2 register. For details, refer to 26.3.2.1 Association between Data I/O Pins and SS Shift
Register. In this mode, the clock polarity, phase, and data settings are performed by using bits CPOS and CPHS in
the SSMR register. For details, refer to 26.3.1.1 Association between Transfer Clock Polarity, Phase, and Data.
When this MCU is set as the master device, the chip select line controls output. When the synchronous serial
communication unit is set as a slave device, the chip select line controls input. When it is set as the master device,
the chip select line controls output of the SCS pin or controls output of a general port according to the setting of the
CSS1 bit in the SSMR2 register. When the MCU is set as a slave device, the chip select line sets the SCS pin as
input by setting bits CSS1 and CSS0 in the SSMR2 register to 01b.
In 4-wire bus communication mode, the MLS bit in the SSMR register is set to 0 and communication is performed
MSB first.
Operation in 4-Wire Bus Communication Mode
Oct 30, 2009
26. Synchronous Serial Communication Unit (SSU)