R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 481

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 444 of 802
22. Timer RG
22.1
The description offered in this chapter is based on the R8C/L3AA Group and the R8C/L3AB Group.
For other groups, refer to 1.1.2 Differences between Groups.
Table 22.1
The count source is f1, f4, f8, f32, TRGCLKA input, or TRGCLKB input.
(Bits TCK2 toTCK0 in the TRGCR register are set to 000b to 101b, and 111b.)
Timer RG is a 16-bit timer with two I/O pins.
Timer RG uses f1 as its operating clock. Table 22.1 lists the Timer RG Operating Clocks.
Figure 22.1 shows the Timer RG Block Diagram, and Table 22.2 lists the Timer RG Pin Configuration.
Timer RG supports the following three modes:
• Timer mode
• PWM mode: PWM output available with any duty
• Phase counting mode: Automatic measurement available for the counts of the two-phase encoder
Note
- Input capture function: Count at the rising edge, falling edge, or both rising and falling edges
- Output compare function: Low-level output, high-level output, or toggle output
Introduction
Timer RG Operating Clocks
Oct 30, 2009
Condition
f1
Timer RG Operating Clock
22. Timer RG