R5F2L3AAANFP#U1 Renesas Electronics America, R5F2L3AAANFP#U1 Datasheet - Page 171

• Manufacturer Part Number: R5F2L3AAANFP#U1
• Description: MCU FLASH 96+4KB 100LQFP
• Manufacturer: Renesas Electronics America
• Series: R8C/Lx/3AAr

Specifications of R5F2L3AAANFP#U1

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: LCD, POR, PWM, Voltage Detect, WDT
• Number Of I /o: 88
• Program Memory Size: 96KB (96K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 20x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/L35A Group, R8C/L36A Group, R8C/L38A Group, R8C/L3AA Group,
R8C/L35B Group, R8C/L36B Group, R8C/L38B Group, R8C/L3AB Group
REJ09B0441-0100 Rev.1.00
Page 134 of 802
9.4.4
Table 9.3
Serial interface interrupt
Synchronous serial
communication unit/
I
Key input interrupt
A/D conversion interrupt (Do not use.)
Timer RA interrupt
Timer RB interrupt
Timer RC interrupt
Timer RD interrupt
Timer RE interrupt
Timer RG interrupt
INT interrupt
Oscillation stop
detection interrupt
2
C bus interface interrupt
The MCU exits wait mode by a reset or peripheral function interrupt. The peripheral function interrupts are
affected by bits CM01 and CM02.
The following interrupts can be used to exit wait mode:
•
•
•
•
Table 9.3 lists Interrupts to Exit Wait Mode and Usage Conditions.
When bits CM02 to CM01 are set to 00b (peripheral function clock does not stop in wait mode), peripheral
function interrupts other than A/D conversion interrupts.
When bits CM02 to CM01 are set to 01b (clocks f1 to f32 stop in wait mode), the interrupts of the peripheral
functions operating with external signals, the on-chip oscillator clock, or clocks fC1 to f32.
When bits CM02 to CM01 are set to 10b (clocks f1 to f32 and fC stop in wait mode), the interrupts of the
peripheral functions operating with external signals or the on-chip oscillator clock.
When bits CM02 to CM01 are set to 11b (clocks f1 to f32, fC, and fC-LCD stop in wait mode), the same
applies when bits CM02 to CM01 are set to 10b.
Interrupt
Exiting Wait Mode
Interrupts to Exit Wait Mode and Usage Conditions
Usable when operating
with an internal or
external clock.
Usable in all modes.
Usable
Usable in all modes.
Usable in all modes.
Usable in all modes.
Usable in all modes.
Usable in all modes.
Usable in all modes.
Usable
Usable
CM02 to CM01 = 00b
Oct 30, 2009
Usable when operating
with fC or an external
clock.
(Do not use.)
Usable
(Do not use.)
Usable if there is no filter
in event counter mode.
Usable by selecting
fOCO-S, fC, or fC32 as
the count source.
(Do not use.)
(Do not use.)
(Do not use.)
Usable when operating
in real time clock mode.
(Do not use.)
Usable if there is no
filter.
(Do not use.)
CM02 to CM01 = 01b
Usable when operating
with an external clock.
(Do not use.)
Usable
(Do not use.)
Usable if there is no filter
in event counter mode.
Usable by selecting
fOCO-S as the count
source.
(Do not use.)
(Do not use.)
(Do not use.)
Usable when operating
in real time clock mode.
(Do not use.)
Usable (INT0 to INT7
can be used if there is
no filter.)
(Do not use.)
CM02 to CM01 = 10b
Usable when operating
with an external clock.
(Do not use.)
Usable
(Do not use.)
Usable if there is no filter
in event counter mode.
Usable by selecting
fOCO-S as the count
source.
(Do not use.)
(Do not use.)
(Do not use.)
Usable when operating
in real time clock mode.
(Do not use.)
Usable (INT0 to INT7
can be used if there is
no filter.)
(Do not use.)
CM02 to CM01 = 11b
9. Power Control