LPC1837FET256,551 NXP Semiconductors, LPC1837FET256,551 Datasheet - Page 134

• Manufacturer Part Number: LPC1837FET256,551
• Description: Microcontrollers (MCU) 32BIT ARM CORTEX-M3 MCU 136KB SRAM
• Manufacturer: NXP Semiconductors
• Series: LPC18xxr

Specifications of LPC1837FET256,551

• Core: ARM Cortex M3
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, SD/MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 80
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 136K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-LBGA
• Lead Free Status / Rohs Status: Details
• Other names: 935293795551

12.1 How to read this chapter
12.2 Pin description
<Document ID>
User manual
This chapter applies to parts LPC1850_30_20_10 Rev ‘A’ only.
On the LPC18xx, digital pins are grouped into 16 ports, named P0 to P9 and PA to PF,
with up to 20 pins used per port. Each digital pin may support up to four different digital
functions, including General Purpose I/O (GPIO), selectable through the SCU registers.
Note that the pin name is not indicative of the GPIO port assigned to it.
UM10430
Chapter 12: LPC18xx Pin configuration
Rev. 00.13 — 20 July 2011
All information provided in this document is subject to legal disclaimers.
Rev. 00.13 — 20 July 2011
© NXP B.V. 2011. All rights reserved.
User manual
134 of 1164