LPC1837FET256,551 NXP Semiconductors, LPC1837FET256,551 Datasheet - Page 828

• Manufacturer Part Number: LPC1837FET256,551
• Description: Microcontrollers (MCU) 32BIT ARM CORTEX-M3 MCU 136KB SRAM
• Manufacturer: NXP Semiconductors
• Series: LPC18xxr

Specifications of LPC1837FET256,551

• Core: ARM Cortex M3
• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, SD/MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 80
• Program Memory Size: 1MB (1M x 8)
• Program Memory Type: FLASH
• Eeprom Size: -
• Ram Size: 136K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-LBGA
• Lead Free Status / Rohs Status: Details
• Other names: 935293795551

NXP Semiconductors
<Document ID>
User manual
Table 774. CAN message interface command arbitration 2 registers (IF1_ARB2, address
Table 775. CAN message interface command arbitration 2 registers (IF2_ARB2, address
Bit
15
31:16
Bit
12:0
13
14
Symbol
MSGVAL
-
Symbol
ID28_16
DIR
XTD
0x400E 2034 (C_CAN0) and 0x400A 4034 (C_CAN1)) bit description
0x400E 2094 (C_CAN0) and 0x400A 4094 (C_CAN1)) bit description
All information provided in this document is subject to legal disclaimers.
Value Description
0
1
-
Value Description
0
1
0
1
Rev. 00.13 — 20 July 2011
Message valid
Remark: The MSGVAL bit of all unused
Messages Objects is reset during the initialization
before bit INIT is reset in the CAN Control
Register. This bit must be set to zero before the
identifier ID28:0, the control bits XTD, DIR, or the
Data Length Code DLC3:0 are modified, or if the
Messages Object is no longer required.
The message object is ignored by the message
handler.
The message object is configured and should be
considered by the message handler.
Reserved
Message identifier
29-bit identifier (“extended frame”)
11-bit identifier (“standard frame”)
Message direction
Direction = receive.
On TXRQST, a Remote Frame with the identifier
of this Message Object is transmitted. On
reception of a Data Frame with matching
identifier, that message is stored in this Message
Object.
Direction = transmit.
On TXRQST, the respective Message Object is
transmitted as a Data Frame. On reception of a
Remote Frame with matching identifier, the
TXRQST bit of this Message Object is set (if
RMTEN = one).
Extend identifier
The 11-bit standard identifier will be used for this
message object.
The 29-bit extended identifier will be used for this
message object.
Chapter 36: LPC18xx C_CAN
UM10430
© NXP B.V. 2011. All rights reserved.
Reset
value
0
0
Reset
value
0x00
0x00
0x00
Access
R/W
-
Access
R/W
R/W
R/W
828 of 1164