UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 431

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
(3) A/D converter mode register 2 (ADA0M2)
The ADA0M2 register specifies the hardware trigger mode.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
Cautions 1. When writing data to the ADA0M2 register in the following modes, stop the A/D
ADA0M2
2. Be sure to clear bits 7 to 2 to “0”.
After reset:
conversion by clearing the AD0M0.ADA0CE bit to 0. After the data is written to the
register, enable the A/D conversion again by setting the ADA0CE bit to 1.
•
•
Normal conversion mode
One-shot select mode/one-shot scan mode in high-speed conversion mode
ADA0TMD1
00H
0
0
1
1
7
0
ADA0TMD0
R/W
0
1
0
1
6
0
Address:
External trigger mode (when ADTRG pin valid edge detected)
Timer trigger mode 0
(when INTTP2CC0 interrupt request generated)
Timer trigger mode 1
(when INTTP2CC1 interrupt request generated)
Setting prohibited
5
0
FFFFF203H
Specification of hardware trigger mode
4
0
3
0
2
0
CHAPTER 13 A/D CONVERTER
ADA0TMD1 ADA0TMD0
1
0
Page 415 of 870