UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 864

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
A/D
converter
Function
Conversion time
selection in
high-speed
conversion
mode
(ADA0HS1 bit =
1)
ADA0M2
register
ADA0S register
ADA0CRn,
ADA0CRnH
registers
ADA0PFM
register
ADA0PFT
register
Details of
Function
Set as 2.6
In the high-speed conversion mode, rewriting of the ADA0M0, ADA0M2, ADA0S,
ADA0PFM, and ADA0PFT registers and trigger input are prohibited during the
stabilization time.
When writing data to the ADA0M2 register in the following modes, stop the A/D
conversion by clearing the AD0M0.ADA0CE bit to 0. After the data is written to
the register, enable the A/D conversion again by setting the ADA0CE bit to 1.
• Normal conversion mode
• One-shot select mode/one-shot scan mode in high-speed conversion mode
Be sure to clear bits 7 to 2 to “0”.
When writing data to the ADA0S register in the following modes, stop the A/D
conversion by clearing the AD0M0.ADA0CE bit to 0. After the data is written to
the register, enable the A/D conversion again by setting the ADA0CE bit to 1.
• Normal conversion mode
• One-shot select mode/one-shot scan mode in high-speed conversion mode
Be sure to clear bits 7 to 4 to “0”.
Accessing the ADA0CRn and ADA0CRnH registers is prohibited in the following
statuses. For details, see 3.4.8 (2) Accessing specific on-chip peripheral I/O
registers.
• When the CPU operates with the subclock and the main clock oscillation is
• When the CPU operates with the internal oscillation clock
A write operation to the ADA0M0 and ADA0S registers may cause the contents of
the ADA0CRn register to become undefined. After the conversion, read the
conversion result before writing to the ADA0M0 and ADA0S registers. Correct
conversion results may not be read if a sequence other than the above is used.
In the select mode, the 8-bit data set to the ADA0PFT register is compared with
the value of the ADA0CRnH register specified by the ADA0S register. If the result
matches the condition specified by the ADA0PFC bit, the conversion result is
stored in the ADA0CRn register and the INTAD signal is generated. If it does not
match, however, the interrupt signal is not generated.
In the scan mode, the 8-bit data set to the ADA0PFT register is compared with the
contents of the ADA0CR0H register. If the result matches the condition specified
by the ADA0PFC bit, the conversion result is stored in the ADA0CR0 register and
the INTAD signal is generated. If it does not match, however, the INTAD signal is
not generated. Regardless of the comparison result, the scan operation is
continued and the conversion result is stored in the ADA0CRn register until the
scan operation is completed. However, the INTAD signal is not generated after
the scan operation has been completed.
When writing data to the ADA0PFM register in the following modes, stop the A/D
conversion by clearing the AD0M0.ADA0CE bit to 0. After the data is written to
the register, enable the A/D conversion again by setting the ADA0CE bit to 1.
• Normal conversion mode
• One-shot select mode/one-shot scan mode in high-speed conversion mode
When writing data to the ADA0PFT register in the following modes, stop the A/D
conversion by clearing the AD0M0.ADA0CE bit to 0. After the data is written to
the register, enable the A/D conversion again by setting the ADA0CE bit to 1.
• Normal conversion mode
• One-shot select mode/one-shot scan mode in high-speed conversion mode
stopped
μ
s ≤ conversion time ≤ 10.4
Cautions
μ
s.
APPENDIX E LIST OF CAUTIONS
Page 848 of 870
p. 414
p. 414
p. 415
p. 415
p. 416
p. 416
p. 417
p. 417
p. 419
p. 419
p. 419
p. 420
Page
(15/36)