UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 700

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
21.5.3 Securing setup time when releasing IDLE2 mode
than the main clock oscillator stops after the IDLE2 mode is set.
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
Secure the setup time for the flash memory after releasing the IDLE2 mode because the operation of the blocks other
(1) Releasing IDLE2 mode by non-maskable interrupt request signal or unmasked maskable interrupt request
(2) Release by reset (RESET pin input, WDT2RES generation)
Oscillated waveform
IDLE mode status
signal
Secure the specified setup time by setting the OSTS register.
When the releasing source is generated, the dedicated internal timer starts counting according to the OSTS
register setting. When it overflows, the normal operation mode is restored.
Interrupt request
This operation is the same as that of a normal reset.
The oscillation stabilization time is the initial value of the OSTS register, 2
Main clock
ROM circuit stopped
Setup time count
CHAPTER 21 STANDBY FUNCTION
16
/f
X
.
Page 684 of 870