UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 445

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
13.5.5 Power-fail compare mode
registers.
select mode, continuous scan mode, one-shot select mode, and one-shot scan mode.
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
The A/D conversion end interrupt request signal (INTAD) can be controlled as follows by the ADA0PFM and ADA0PFT
• When the ADA0PFM.ADA0PFE bit = 0, the INTAD signal is generated each time conversion is completed (normal
• When the ADA0PFE bit = 1 and when the ADA0PFM.ADA0PFC bit = 0, the value of the ADA0CRnH register is
• When the ADA0PFE bit = 1 and when the ADA0PFC bit = 1, the value of the ADA0CRnH register is compared with
In the power-fail compare mode, four modes are available as modes in which to set the ANI0 to ANI11 pins: continuous
use of the A/D converter).
compared with the value of the ADA0PFT register when conversion is completed, and the INTAD signal is generated
only if ADA0CRnH ≥ ADA0PFT.
the value of the ADA0PFT register when conversion is completed, and the INTAD signal is generated only if
ADA0CRnH < ADA0PFT.
Remark
n = 0 to 11
CHAPTER 13 A/D CONVERTER
Page 429 of 870