UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 859

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
16-bit
timer/
event
counter Q
(TMQ)
Function
TQ0IOC1
register
TQ0IOC2
register
TQ0OPT0
register
TQ0CCR0
register
TQ0CCR1
register
TQ0CCR2
register
TQ0CCR3
register
TQ0CNT
register
External event
count mode
Details of
Function
Rewrite the TQ0IS7 to TQ0IS0 bits when the TQ0CTL0.TQ0CE bit = 0. (The
same value can be written when the TQ0CE bit = 1.) If rewriting was mistakenly
performed, clear the TQ0CE bit to 0 and then set the bits again.
The TQ0IS7 to TQ0IS0 bits are valid only in the freerunning timer mode and the
pulse width measurement mode. In all other modes, a capture operation is not
possible.
Rewrite the TQ0EES1, TQ0EES0, TQ0ETS1, and TQ0ETS0 bits when the
TQ0CTL0.TQ0CE bit = 0. (The same value can be written when the TQ0CE bit =
1.) If rewriting was mistakenly performed, clear the TQ0CE bit to 0 and then set
the bits again.
The TQ0EES1 and TQ0EES0 bits are valid only when the TQ0CTL1.TQ0EEE bit
= 1 or when the external event count mode (TQ0CTL1.TQ0MD2 to
TQ0CTL1.TQ0MD0 bits = 001) has been set.
The TQ0ETS1 and TQ0ETS0 bits are valid only when the external trigger pulse
output mode (TQ0CTL1.TQ0MD2 to TQ0CTL1.TQ0MD0 bits = 010) or the one-
shot pulse output mode (TQ0CTL1.TQ0MD2 to TQ0CTL1.TQ0MD0 = 011) is set.
Rewrite the TQ0CCS3 to TQ0CCS0 bits when the TQ0CTL0.TQ0CE bit = 0. (The
same value can be written when the TQ0CE bit = 1.) If rewriting was mistakenly
performed, clear the TQ0CE bit to 0 and then set the bits again.
Be sure to clear bits 1 to 3 to “0”.
Accessing the TQ0CCR0 register is prohibited in the following statuses. For
details, see 3.4.8 (2) Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is
• When the CPU operates with the internal oscillation clock
Accessing the TQ0CCR1 register is prohibited in the following statuses. For
details, see 3.4.8 (2) Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is
• When the CPU operates with the internal oscillation clock
Accessing the TQ0CCR2 register is prohibited in the following statuses. For
details, see 3.4.8 (2) Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is
• When the CPU operates with the internal oscillation clock
Accessing the TQ0CCR3 register is prohibited in the following statuses. For
details, see 3.4.8 (2) Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is
• When the CPU operates with the internal oscillation clock
Accessing the TQ0CNT register is prohibited in the following statuses. For details,
see 3.4.8 (2) Accessing specific on-chip peripheral I/O registers.
• When the CPU operates with the subclock and the main clock oscillation is
• When the CPU operates with the internal oscillation clock
To use the external event count mode, specify that the valid edge of the TIQ00
pin capture trigger input is not detected (by clearing the TQ0IOC1.TQ0IS1 and
TQ0IOC1.TQ0IS0 bits to “00”).
stopped
stopped
stopped
stopped
stopped
Cautions
APPENDIX E LIST OF CAUTIONS
Page 843 of 870
p. 284
p. 284
p. 285
p. 285
p. 285
p. 286
p. 286
p. 287
p. 289
p. 291
p. 293
p. 295
p. 296
Page
(10/36)