UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 821

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
A.4 Debugging Tools (Hardware)
A.4.1
compatible) is shown below. Even if optional products are not prepared, connection is possible.
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
The system configuration when connecting the QB-V850ESSX2 to the host machine (PC-9821 series, PC/AT
<1> Host machine (PC-9821 series, IBM-PC/AT compatibles)
<2> Debugger, USB driver, manuals, etc. (ID850QB Disk, Accessory Disk
<3> USB interface cable
<4> AC adapter
<5> In-circuit emulator (QB-V850ESSX2)
<6> Check pin adapter (S and T types) (QB-144-CA-01
<7> Extension probe (S and T types) (QB-144-EP-01S) (optional)
<8> Exchange adapter
<9> Check pin adapter
<10> Space adapter
<11> YQ connector
<12> Mount adapter (S type: QB-100GC-MA-01S, T type: QB-100GC-HQ-01T) (optional)
<13> Target connector
<14> Target system
<7> Extension probe
<8> Exchange adapter
<9> Check pin adapter (S type only)
<10> Space adapter
<12> Mount adapter
<13> Target connector
<6> Check pin adapter (under development)
When using IECUBE QB-V850ESSX2
Probe can be connected (S and T types)
Exchanges pins among different microcontroller types
Enables signal monitoring
Enables signal monitoring (S and T types)
Each adapter can adjust height by 5.6 mm.
For device mounting
For mounting on target system
<14> Target system
Accessories
Required
Optional
Note 3
Note 4
Figure A-2. System Configuration (When Using QB-V850ESSX2) (1/2)
Note 3
(T type only) (QB-100GC-YQ-01T)
Note 3
Note 4
(S type: QB-100-SA-01S, T type: QB-100GC-YS-01T) (optional)
(S type: QB-100GC-TC-01S, T type: QB-100GC-NQ-01T)
(S type: QB-100GC-EA-01S, T type: QB-100GC-EA-01T)
(S type only) (QB-100-CA-01S) (optional)
<5> IECUBE
S-type socket
configuration
System configuration
Note 2
) (optional)
T-type socket
configuration
<4> Power
<3> USB cable
supply
<8> Exchange adapter
<10> Space adapter
<11> YQ connector
APPENDIX A DEVELOPMENT TOOLS
Note 1
Exchanges pins among different microcontroller types
Each adapter can adjust height by 3.2 mm.
Connector for connecting to emulator
<13> Target connector
)
<2> CD-ROM
For mounting on target system
<12> Mount adapter
<14> Target system
For device mounting
Simple flash
programmer
<1>
Page 805 of 870