UPD70F3740GC-UEU-AX Renesas Electronics America, UPD70F3740GC-UEU-AX Datasheet - Page 822

• Manufacturer Part Number: UPD70F3740GC-UEU-AX
• Description: MCU 32BIT V850ES/JX3 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3740GC-UEU-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 84
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3
R01UH0015EJ0300 Rev.3.00
Sep 30, 2010
<5> QB-V850ESSX2
<3> USB interface cable
<4> AC adapter
<8> QB-100GC-EA-01S
<9> QB-100-CA-01S
<10> QB-100-SA-01S
<11> QB-100GC-YQ-01T
<12> QB-100GC-MA-01S
<13> QB-100GC-TC-01S
Notes 1. Download the device file from the Renesas Electronics website.
Note The QB-V850ESSX2 is supplied with a power supply unit, USB interface cable, and simple programmer. It is
Remark The numbers in the angle brackets correspond to the numbers in Figure A-2.
In-circuit emulator
QB-100GC-EA-01T
Exchange adapter
Check pin adapter
QB-100GC-YS-01T
Space adapter
YQ connector
QB-100GC-HQ-01T
Mount adapter
QB-100GC-NQ-01T
Target connector
also supplied with integrated debugger ID850QB as control software.
4. When using both <9> and <10>, the order between <9> and <10> is not cared.
2. Under development
3. Supplied with the device depending on the ordering number.
http://www2.renesas.com/micro/ja/ods/index.html
• When QB-V850ESSX2-ZZZ is ordered
• When QB-V850ESSX2-S100GC is ordered
• When QB-V850ESSX2-T100GC is ordered
The exchange adapter and the target connector are not supplied.
The QB-100GC-EA-01S and QB-100GC-TC-01S are supplied.
The QB-100GC-EA-01T, QB-100GC-YQ-01T, and QB-100GC-NQ-01T are supplied.
Note
Figure A-2. System Configuration (When Using QB-V850ESSX2) (2/2)
The in-circuit emulator serves to debug hardware and software when developing
application systems using the V850ES/JG3. It supports to the integrated debugger
ID850QB. This emulator should be used in combination with a power supply unit and
emulation probe. Use the USB interface cable to connect this emulator to the host
machine.
Cable to connect the host machine and the QB-V850ESSX2.
100 to 240 V can be supported by replacing the AC plug.
Adapter to perform pin conversion.
Adapter used in waveform monitoring using the oscilloscope, etc.
Adapter to adjust the height.
Conversion adapter to connect the target connector and the exchange adapter.
Adapter to mount the V850ES/JG3 with socket.
Connector to solder on the target system.
APPENDIX A DEVELOPMENT TOOLS
Page 806 of 870