UPD70F3451GC-UBT-A Renesas Electronics America, UPD70F3451GC-UBT-A Datasheet - Page 185

• Manufacturer Part Number: UPD70F3451GC-UBT-A
• Description: MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: Renesas Electronics America
• Series: V850E/Ix3r

Specifications of UPD70F3451GC-UBT-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: CSI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 10x12b, 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<R>
(6) Clock monitor mode register (CLM)
Cautions 1. The CLME bit is cleared to 0 only after reset.
The CLM register sets clock monitor operation mode. The CLM register is a special register. It can be written
only in a combination of specific sequences (see 3.4.8 Special registers).
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
2. When the CLME bit = 1, the clock monitor function is forcibly stopped if the following
3. When the CLME bit = 1, output of the timer for motor control goes into a high-impedance
After reset: 00H
CLM
conditions are satisfied.
• During oscillation stabilization time count after release of STOP mode
state if oscillation (f
CLME
0
1
0
Clock monitor operation disabled
Clock monitor operation enabled
R/W
0
X
) stop is detected. See Figure 10-4 for the target timer output.
CHAPTER 5 CLOCK GENERATOR
Address: FFFFF870H
User’s Manual U18279EJ3V0UD
0
Clock monitor operation control
0
0
0
0
CLME
183