UPD70F3451GC-UBT-A Renesas Electronics America, UPD70F3451GC-UBT-A Datasheet - Page 365

• Manufacturer Part Number: UPD70F3451GC-UBT-A
• Description: MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: Renesas Electronics America
• Series: V850E/Ix3r

Specifications of UPD70F3451GC-UBT-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: CSI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 10x12b, 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

<1> Count operation start flow
<2> TABnCCR0 to TABnCCR3 register setting change flow
TABnCCR0 to TABnCCR3
Remark
Setting of TABnCCR0 to
Register initial setting
TABnCTL1 register,
TABnIOC0 register,
TABnIOC2 register,
TABnCTL0 register
TABnCCR3 registers
TABnCKS2 bits)
TABnCE bit = 1
(TABnCKS0 to
registers
START
n = 0, 1
a = 0 to 3
Figure 7-27. Software Processing Flow in One-Shot Pulse Output Mode (2/2)
CHAPTER 7 16-BIT TIMER/EVENT COUNTER AB (TAB)
As rewriting the TABnCCRa
register immediately forwards
to the CCRa buffer register,
rewriting immediately after
the generation of the INTTBnCC0
signal is recommended.
Initial setting of these
registers is performed
before setting the
TABnCE bit to 1.
The TABnCKS0 to TABnCKS2
bits can be set at the same
time as when counting starts
(TABnCE bit = 1).
Trigger wait status
User’s Manual U18279EJ3V0UD
<2> Count operation stop flow
TABnCE bit = 0
STOP
Count operation is stopped
363