UPD70F3451GC-UBT-A Renesas Electronics America, UPD70F3451GC-UBT-A Datasheet - Page 412

• Manufacturer Part Number: UPD70F3451GC-UBT-A
• Description: MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: Renesas Electronics America
• Series: V850E/Ix3r

Specifications of UPD70F3451GC-UBT-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: CSI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 10x12b, 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

410
Cautions 1. The TTmEST bit is valid only in the external trigger pulse output mode or one-shot pulse
2. The TTmEEE bit is valid only in the interval timer mode, external trigger pulse output mode,
3. External event count input (EVTTm) or encoder inputs (TENCm0, TENCm1) is selected in
4. Set the TTmEEE and TTnMD3 to TTnMD0 bits when the TTnCTL0.TTnCE bit = 0. (The same
5. Be sure to set bits 4 and 7 to “0”.
output mode. In any other mode, writing 1 to this bit is ignored.
one-shot pulse output mode, PWM output mode, free-running timer mode, pulse width
measurement mode, or triangular-wave PWM output mode. In any other mode, writing 1 to
this bit is ignored.
the external event count mode or encoder compare mode regardless of the value of the
TTmEEE bit.
value can be written when the TTnCE bit = 1.) The operation is not guaranteed when
rewriting is performed with the TTnCE bit = 1. If rewriting was mistakenly performed, clear
the TTnCE bit to 0 and then set the bits again.
CHAPTER 8 16-BIT TIMER/EVENT COUNTER T (TMT)
User’s Manual U18279EJ3V0UD
(2/2)