UPD70F3451GC-UBT-A Renesas Electronics America, UPD70F3451GC-UBT-A Datasheet - Page 541

• Manufacturer Part Number: UPD70F3451GC-UBT-A
• Description: MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: Renesas Electronics America
• Series: V850E/Ix3r

Specifications of UPD70F3451GC-UBT-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: CSI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 10x12b, 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

with the count clock, and the counter starts counting.
cleared to 0000H, and a compare match interrupt request signal (INTTMnEQ0) is generated.
When the TMnCE bit is set to 1, the value of the 16-bit counter is cleared from FFFFH to 0000H in synchronization
When the count value of the 16-bit counter matches the value of the TMnCMP0 register, the 16-bit counter is
The interval can be calculated by the following expression.
Interval = (Set value of TMnCMP0 register + 1) × Count clock cycle
TMnCTL0
(a) TMMn control register 0 (TMnCTL0)
(b) TMMn compare register 0 (TMnCMP0)
If the TMnCMP0 register is set to D
Interval = (D
TMnCE
0/1
0
+ 1) × Count clock cycle
Figure 9-4. Register Setting for Interval Timer Mode Operation
0
CHAPTER 9 16-BIT INTERVAL TIMER M (TMM)
0
User’s Manual U18279EJ3V0UD
0
0
, the interval is as follows.
0
TMnCKS2 TMnCKS1 TMnCKS0
0/1
0/1
0/1
Select count clock
0: Stop counting
1: Enable counting
539