UPD70F3451GC-UBT-A Renesas Electronics America, UPD70F3451GC-UBT-A Datasheet - Page 202

• Manufacturer Part Number: UPD70F3451GC-UBT-A
• Description: MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: Renesas Electronics America
• Series: V850E/Ix3r

Specifications of UPD70F3451GC-UBT-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: CSI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 10x12b, 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

200
(2) TAAn control register 1 (TAAnCTL1)
Notes 1. This bit can be set only in TAA0 and TAA1. Be sure to set bit 7 of TAA2 to TAA4 to “0”.
The TAAnCTL1 register is an 8-bit register that controls the TAAn operation.
This register can be read or written in 8-bit or 1-bit units.
Reset sets this register to 00H.
2. In the V850E/IF3, this bit can be set only in TAA2 and TAA4. Be sure to set bits 5 and 6 of TAA0,
For details of tuning operation mode, see CHAPTER 10 MOTOR CONTROL FUNCTION.
TAA1, and TAA3 to “0”.
In the V850E/IG3, this bit can be set only in TAA2 to TAA4. Be sure to set bits 5 and 6 of TAA0 and
TAA1 to “0”.
V850E/IF3
V850E/IG3
TAAnCTL1
n = 0 to 4
m = 2, 4
a = 0, 1
n = 0 to 4
m = 2 to 4
a = 0, 1
After reset: 00H
TAAmEST
TAAaSYE
TAAaSYE
TAAa can be used only as an A/D conversion start trigger factor of A/D converters 0
and 1 during the tuning operation. In the tuning operation mode,
operates in synchronization with
The read value of the TAAmEST bit is always 0.
0
1
0
1
7
CHAPTER 6 16-BIT TIMER/EVENT COUNTER AA (TAA)
Note 1
Note 2
Note 1
TAAmEST
TAAa single mode
Tuning operation mode (see 10.4.5)
Generates a valid signal for external trigger input.
• In one-shot pulse output mode:
• In external trigger pulse output mode:
R/W
A one-shot pulse is output with writing 1 to the TAAmEST bit as the
trigger.
A PWM waveform is output with writing 1 to the TAAmEST bit as the
trigger.
6
Note 2
Address: TAA0CTL1 FFFFF661H, TAA1CTL1 FFFFF681H,
TAAmEEE
User’s Manual U18279EJ3V0UD
5
Note 2
TAA2CTL1 FFFFF6A1H, TAA3CTL1 FFFFFB01H,
TAA4CTL1 FFFFFB21H
TABa.
Operation mode selection
4
0
Software trigger control
3
0
−
TAAnMD2 TAAnMD1 TAAnMD0
2
this bit always
1
0
(1/2)