UPD70F3451GC-UBT-A Renesas Electronics America, UPD70F3451GC-UBT-A Datasheet - Page 420

• Manufacturer Part Number: UPD70F3451GC-UBT-A
• Description: MCU 32BIT 128KB FLASH 80LQFP
• Manufacturer: Renesas Electronics America
• Series: V850E/Ix3r

Specifications of UPD70F3451GC-UBT-A

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 64MHz
• Connectivity: CSI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 44
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3.5 V ~ 5.5 V
• Data Converters: A/D 10x12b, 4x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

418
Cautions 1. Rewrite the TTmSCE, TTmZCL, TTmBCL, TTmACL, TTmECS1, TTmECS0, TTmEIS1, and
2. The TTmECS1 and TTmECS0 bits are valid only when the TTmSCE bit = 0 and the encoder
3. The TTmEIS1 and TTmEIS0 bits are valid only when the TTmCTL2.TTmUDS1 and
TTmEIS0 bits when the TTmCTL0.TTmCE bit = 0. (The same value can be written to these
bits when the TTmCE bit = 1.) If rewriting was mistakenly performed, clear the TTmCE bit
to 0 and then set these bits again.
compare mode is set.
TTmCTL2.TTmUDS0 bits = 00 or 01.
TTmECS1
TTmEIS1
0
0
1
1
0
0
1
1
TTmECS0
TTmEIS0
CHAPTER 8 16-BIT TIMER/EVENT COUNTER T (TMT)
0
1
0
1
0
1
0
1
Valid edge setting of encoder input signals (TENCm0, TENCm1 pins)
Detects no edge (clearing encoder is invalid).
Detects rising edge.
Detects falling edge.
Detects both edges.
Detects no edge (inputting encoder is invalid).
Detects rising edge.
Detects falling edge.
Detects both edges.
User’s Manual U18279EJ3V0UD
Valid edge setting of encoder clear signal (TECRm pin)
(2/2)