TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 344

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

(3) Data format
(4) SFR
stopped. The following example describes how to set this register:
The data format is fixed as follows:
Figure 3.14.21 shows the control register SIRCR. Set SIRCR data while SIO0 is
1) SIO setting
2) LD (SIRCR), 07H
3) LD (SIRCR), 37H
4) Start transmission
Data length: 8-bit
Parity bits:
Stop bits:
and receiving for SIO0
↓
↓
none
92CF26A-342
1bit
; Set the SIO to UART Mode.
; Set the receive data pulse width to 16×.
; TXEN, RXEN Enable the Transmission and receiving.
; The modem operates as follows:
SIO0 starts transmitting.
IR receiver starts receiving.
TMP92CF26A
2009-06-25