TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 481

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

3.17 SPI Controller (SPIC)
The SPIC is a Serial Peripheral Interface Controller that supports only master mode.
It can be connected to the SD card, MMC (Multi Media Card) etc. in SPI mode.
Its features are summarized as follows:
1) On-chip 32-byte FIFOs for both transmission and reception
2) Generates the CRC-7 and CRC-16 values for transmission and reception
3) Baud Rate: 20 Mbps (max)
4) Can be connected to multiple SD cards and the MMC. (Since there is only oen chip select
5) Operates as the general synchronous SIO
6) Two types of interrupts: INTSPITX (Transmit interrupt), INTSPIRX (receive interrupt)
Selects the followings: MSB/LSB-first, 8/16-bit data length, rising/falling edge
Select Read/Mask for interrupts: RFUL, TEMP, REND and TEND
signal preassigned as SPCS, use other output ports to allow for more than two
connections.)
92CF26A-479
TMP92CF26A
2009-06-25