TMP92xy26AXBG Toshiba, TMP92xy26AXBG Datasheet - Page 419

• Manufacturer Part Number: TMP92xy26AXBG
• Manufacturer: Toshiba

Specifications of TMP92xy26AXBG

• Package: FPGA228
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144/288
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 136
• Power Supply Voltage(v): 3.0 to 3.6

bmRequestType
bmRequestType
bmRequestType
00000000B
10000000B
00000000B
(6) SET_DESCRIPTOR request
(7) GET_CONFIGURATION request
(8) SET_CONFIGURATION request
identified as a SET_DESCRIPTOR request, take back data after confirming
EP0_DSET_A bit of DATASET register is “1”. When completed, access EOP
register, and write “0” to EP0_EOPB bit, so, status stage is finished. The process is
the same for a vendor request.
value.
This request sets or enables the relevant function.
Automatic answer of this request is not supported.
According to INT_SETUP interrupt, if the receiving requested has been
Please refer to vendor request section.
This request returns configuration value of present device.
If it is not configured, it returns “0”. Otherwise, it returns the configuration
This request sets device configuration.
The configuration value is that specified using lower byte of wValue field.
When this value is “0”, it is not configured.
bRequest
bRequest
bRequest
Descriptor
CONFIG
CONFIG
GET_
SET_
SET_
Descriptor index
Descriptor type
Configuration
92CF26A-417
wValue
wValue
wValue
value
and
0
Language ID
wIndex
wIndex
wIndex
or
0
0
0
Descriptor
wLength
wLength
wLength
length
1
0
TMP92CF26A
Configuration
Descriptor
2009-06-25
value
Data
Data
Data
None