MCBSTM32EXL Keil, MCBSTM32EXL Datasheet - Page 153

• Manufacturer Part Number: MCBSTM32EXL
• Description: BOARD EVALUATION FOR STM32F103ZE
• Manufacturer: Keil

Specifications of MCBSTM32EXL

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RM0008
8.3.3
8.3.4
8.3.5
CAN1 alternate function remapping
The CAN signals can be mapped on Port A, Port B or Port D as shown in
D, remapping is not possible in devices delivered in 36-, 48- and 64-pin packages.
Table 30.
1. CAN1_RX and CAN1_TX in connectivity line devices; CAN_RX and CAN_TX in other devices with a single
2. Remap not available on 36-pin package
3. This remapping is available only on 100-pin and 144-pin packages, when PD0 and PD1 are not remapped
CAN2 alternate function remapping
CAN2 is available in connectivity line devices. The external signal can be remapped as
shown in
Table 31.
JTAG/SWD alternate function remapping
The debug interface signals are mapped on the GPIO ports as shown in
Table 32.
CAN1_RX or CAN_RX
CAN1_TX or CAN_RX
Alternate function
CAN interface.
on OSC-IN and OSC-OUT.
Alternate function
Chapter Table 31.
JTDO / TRACESWO
CAN2_RX
CAN2_TX
Alternate function
JTCK / SWCLK
JTMS / SWDIO
CAN1 alternate function remapping
CAN2 alternate function remapping
Debug interface signals
TRACECK
TRACED0
TRACED1
TRACED2
TRACED3
JNTRST
JTDI
(1)
General-purpose and alternate-function I/Os (GPIOs and AFIOs)
CAN_REMAP[1:0] =
Doc ID 13902 Rev 9
PA11
PA12
“00”
CAN2_REMAP = “0”
PB12
PB13
CAN_REMAP[1:0] =
“10”
PB8
PB9
(2)
GPIO port
PA13
PA14
PA15
PB3
PB4
PE2
PE3
PE4
PE5
PE6
CAN2_REMAP = “1”
CAN_REMAP[1:0] =
Table
Table
PB5
PB6
“11”
PD0
PD1
32.
30. For port
(3)
153/995