MCBSTM32EXL Keil, MCBSTM32EXL Datasheet - Page 219

• Manufacturer Part Number: MCBSTM32EXL
• Description: BOARD EVALUATION FOR STM32F103ZE
• Manufacturer: Keil

Specifications of MCBSTM32EXL

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RM0008
11.12
11.12.1
31
15
30
14
Bits 31:5
ADC registers
Refer to
ADC status register (ADC_SR)
Address offset: 0x00
Reset value: 0x0000 0000
Bit 4 STRT: Regular channel Start flag
Bit 3 JSTRT: Injected channel Start flag
Bit 2 JEOC: Injected channel end of conversion
Bit 1 EOC: End of conversion
Bit 0 AWD: Analog watchdog flag
29
13
Reserved, must be kept cleared.
This bit is set by hardware when regular channel conversion starts. It is cleared by software.
0: No regular channel conversion started
1: Regular channel conversion has started
This bit is set by hardware when injected channel group conversion starts. It is cleared by
software.
0: No injected group conversion started
1: Injected group conversion has started
This bit is set by hardware at the end of all injected group channel conversion. It is cleared by
software.
0: Conversion is not complete
1: Conversion complete
This bit is set by hardware at the end of a group channel conversion (regular or injected). It is
cleared by software or by reading the ADC_DR.
0: Conversion is not complete
1: Conversion complete
This bit is set by hardware when the converted voltage crosses the values programmed in
the ADC_LTR and ADC_HTR registers. It is cleared by software.
0: No Analog watchdog event occurred
1: Analog watchdog event occurred
28
12
Section 1.1 on page 37
27
11
Reserved
26
10
Res.
25
9
Doc ID 13902 Rev 9
for a list of abbreviations used in register descriptions.
24
8
Reserved
23
7
22
6
21
5
Analog-to-digital converter (ADC)
STRT
rc_w0
20
4
JSTRT
rc_w0
19
3
JEOC
rc_w0
18
2
rc_w0
EOC
17
1
219/995
rc_w0
AWD
16
0