MCBSTM32EXL Keil, MCBSTM32EXL Datasheet - Page 973

• Manufacturer Part Number: MCBSTM32EXL
• Description: BOARD EVALUATION FOR STM32F103ZE
• Manufacturer: Keil

Specifications of MCBSTM32EXL

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

RM0008
Bits 31:22
Bits 20:17 DBG_TIMx_STOP: TIMx counter stopped when core is halted (x=8..5)
Bits 13:10 DBG_TIMx_STOP: TIMx counter stopped when core is halted (x=4..1)
Bits 7:5 TRACE_MODE[1:0] and TRACE_IOEN: Trace pin assignment control
Bit 4:3
Bit 21 DBG_CAN2_STOP: Debug CAN2 stopped when core is halted
Bit 16 DBG_I2C2_SMBUS_TIMEOUT: SMBUS timeout mode stopped when Core is halted
Bit 15 DBG_I2C1_SMBUS_TIMEOUT: SMBUS timeout mode stopped when Core is halted
Bit 14 DBG_CAN1_STOP: Debug CAN1 stopped when Core is halted
Bit 9 DBG_WWDG_STOP: Debug window watchdog stopped when core is halted
Bit 8 DBG_IWDG_STOP: Debug independent watchdog stopped when core is halted
– With TRACE_IOEN=0:
– With TRACE_IOEN=1:
0: Same behavior as in normal mode.
1: CAN2 receive registers are frozen.
0: The clock of the involved timer counter is fed even if the core is halted, and the outputs
behave normally.
1: The clock of the involved timer counter is stopped when the core is halted, and the outputs
are disabled (as if there were an emergency stop in response to a break event).
0: Same behavior as in normal mode.
1: The SMBUS timeout is frozen
0: Same behavior as in normal mode.
1: The SMBUS timeout is frozen.
0: Same behavior as in normal mode.
1: CAN1 receive registers are frozen.
0: The clock of the involved Timer Counter is fed even if the core is halted.
1: The clock of the involved Timer counter is stopped when the core is halted.
0: The window watchdog counter clock continues even if the core is halted.
1: The window watchdog counter clock is stopped when the core is halted.
0: The watchdog counter clock continues even if the core is halted.
1: The watchdog counter clock is stopped when the core is halted.
TRACE_MODE=xx: TRACE pins not assigned (default state)
TRACE_MODE=00: TRACE pin assignment for Asynchronous Mode
TRACE_MODE=01: TRACE pin assignment for Synchronous Mode with a TRACEDATA size
of 1
TRACE_MODE=10: TRACE pin assignment for Synchronous Mode with a TRACEDATA size
of 2
TRACE_MODE=11: TRACE pin assignment for Synchronous Mode with a TRACEDATA size
of 4
Reserved, must be kept cleared.
Reserved, must be kept cleared.
Doc ID 13902 Rev 9
Debug support (DBG)
973/995