HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 1106

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Notes: 1. This pin is pulled up in this LSI. Using external pull-up resistors will not affect the use of
The maximum frequency of a TCK (TMS, TDI, and TDO) signal is 20 MHz, or 2 MHz when
boundary scan function is used. Set the TCK clock or the CPG of this LSI so that the frequency of
TCK is lower than the frequency of the peripheral clock of this LSI.
Rev. 2.00 Feb. 12, 2010 Page 1022 of 1330
REJ09B0554-0200
Pin Name
Emulator
2. Design the TRST pin so that it can retain low while the RESET pin is asserted low at a
3. This pin should be connected to ground, the RESET, or another pin that operates in the
4. Pull up these pins when not using them as emulator pins and they are not in the output
interrupts or resets via the H-UDI or emulators on the board.
power on reset and can control reset independently, to use interrupts or resets via the
H-UDI or emulators on the board.
same manner as the RESET pin. However, note that connecting this pin to a ground pin
will cause the following problem. Since the TRST pin is pulled up within this LSI, a weak
current flows when the pin is externally connected to ground. The value of the current is
determined by a resistance of the pull-up MOS for the port pin. Although this current
does not affect the operation of this LSI, it consumes unnecessary power.
state.
Abbreviation
AUDSYNC/
AUDCK/
AUDATA[3] to
AUDATA[0]
I/O
Output Emulator Connection
Function
When bit 13 of IPSELR in the PFC is set to 1,
signals are output to the following pins.
CAN0_TX/AUDATA[0]
CAN1_TX/AUDATA[1]
CAN0_RX/AUDATA[2]
CAN1_RX/AUDATA[3]
CAN0_NERR/AUDCK
CAN1_NERR/AUDSYNC
When bit 12 of IPSELR in the PFC is set to 1,
signals are output to the following pins.
ADTRG/AUDATA[0]
Reserved/AUDATA[1]
Reserved/AUDATA[2]
Reserved/AUDATA[3]
Reserved/AUDCK
Reserved/AUDSYNC
When Not
in Use
Open*
4