HD6417760BL200AV Renesas Electronics America, HD6417760BL200AV Datasheet - Page 855

• Manufacturer Part Number: HD6417760BL200AV
• Description: SH4 7760, 17 X17 256BGA, LCDC, U
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417760BL200AV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: Audio Codec, CAN, EBI/EMI, FIFO, I²C, MFI, MMC, SCI, Serial Sound, SIM, SPI, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 69
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.4 V ~ 1.6 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit
31 to 16
15 to 0
Bit Name
PPCM
DR
Initial Value
All 0
All 0
R/W
R/W
R/W
Description
Port Power Control Mask
Each bit indicates whether or not the corresponding
port is affected by a global power control command
when HcRhDescriptorA.PSM = 1. When a bit is set to
1, the corresponding port's power state is affected
only by per-port power control (Set/ClearPortPower).
When a bit is cleared to 0, the corresponding port is
controlled by the global power switch
(Set/ClearGlobalPower). If the device is configured to
global switching mode (PSM = 0), settings in these
bits are not valid.
H'0000: Port 1 is affected by global power control
H'0002: Port 1 is masked from global power control
Other than above: Setting prohibited
Bit 16: Reserved
Bit 17: Ganged-power mask on Port 1
Bit 18: Ganged-power mask on Port 2
Bit 31: Ganged-power mask on Port 15
Note: Before setting these bits, clear
Device Removable
Each bit is used only for a port of the root hub. When
a bit is cleared to 0, the attached device is removable
from the corresponding port. When a bit is set to 1,
the attached device is not removable from the
corresponding port.
H'0000: Device connected to port 1 can be removed
H'0002: Device connected to port 1 cannot be
Other than above: Setting prohibited
Bit 0: Reserved
Bit 1: Device attached to Port 1
Bit 2: Device attached to Port 2
Bit 15: Device attached to Port 15
...
...
HcRhDescriptorA.NPS = 0 and
HcRhPortStatus.PPS = 0 to turn off the power
of all ports.
removed
Rev. 2.00 Feb. 12, 2010 Page 771 of 1330
REJ09B0554-0200